How To Operate Automatic BFS Liquid Packing Machine On a Daily Basis?

1. The Automatic BFS Liquid Packing Machine is fully warmed up, and the alarm is completed. Set the “length of the bag” and “set the number of bags” according to the quantity of the liquid. Press the “Start” button to start the heat and packaging.

Pack several empty bags, press the “stop” button to stop, observe the packaging effect of the package, press the “Start” button when hot and good, and immediately press the “Inject” button to infuse the liquid.

2. Wipe the outside of the machine with a clean cloth. When the packaging machine is not used for a long time, the power of the electric control box should be turned off to save energy and prolong the life of the packaging machine.

3. Clean the filter device and the glass barrel and the PE Plastic Ampoule Filling Packing Machine of the packaging machine to discharge the waste water, close the drain valve, and then add some clean water to the packaging machine to cut the lower mouth of the bag under the cutter shaft;

Press the “Cleaning” button to make the clean water flow out of the injection tube assembly, and then press the “Still/Adjust” button to stop the delivery.